Top 5 Reasons of Odour Control System Failures
Zahid, Co-founder & CEO
30 Sep 2021
Zahid, Co-founder & CEO
30 Sep 2021
Odour control is one of the stabilizing systems, required in every treatment
plant or industrial unit, since, this mediation brings a peaceful relation with
public and local authorities.
So, if your odour control system doesn’t work, may create inevitable issue to society, lead to legal confrontations and disrupts your entire clientele & business reputation. A business can’t afford any kind of odour control systems’ downtime or technical mismanagements.
It would be best to consider scaling to attain sustainable business growth, regardless of your stature as a business outfit.
An overwhelming, simultaneously – a unique overview on the
reasons of system failures; performance check of odour
control systems, is mentioned below;
1. Adopting a wrong odour control technology:
There are many proven odour control technologies available in the market; but ensure to select one, based on your requirements.
Know How-To Choose a Right Odour Control Technology
2. In sufficient dosage of consumable chemicals:
When it comes to chemical and wet scrubbers, maintaining a sufficient quantity of oxidising chemicals is very critical; if the quantity of the chemicals is not adequate, this can affect the performance of the chemical scrubber.
3. Not maintaining the quality of re-circulated water:
When it comes to chemical or biological scrubbing systems, operator has to
always balance a required quality of the re-circulation liquid. As the change in
the parameters of the re-circulation liquid can alter the performance of odour
removal.
For instance, if the chlorine content in the re-circulating water is reaching
higher than the permitted level, this can immediately kill the microorganism in
the bio-scrubbertower and affect the system performance for continual period of
time, it may even last for weeks, to revive again.
4. Changes in the odour concentration at the odour source:
Odour control systems are being operated, based on an average concentration of an odour causing gases, the systems are designed to take a peak load for a couple of hours instead. But if the level of odour concentration increases beyond to a certain limit, it shall affect the systems’ odour removal efficiency.
5.Not operating as per manufacturer guidelines:
Odour control systems are tailor-made for the business site and needs, so it is
always advised to operate the system as per manufacturer operation &
maintenance manual provided, as the system design parameters may vary from
site to site.
It is necessary to highlight these definite functional areas that can develop liabilities for a business. Odour control equipment consumes a lot of money and time- indeed, you can put those resources to better use instead. This is where you can consider a premium odour control service providers to ease the performance of systems. Hence you must always make a point to read such information before signing anyone up. Contact us today!
Read more:
